What is CAT8 network cable? (Source: Shenzhen STC Electronic Co., Limited)
Industry: Consumer Electronics
If you are in the network communication industry, I believe you should know some Ethernet cables, such as Category 5e network cables, Category 6 network cables, and Category 7 network cables, etc. But do you know what the Cat8 network cable is? What is the difference between it and Category 5 network cable, Category 6/Category 6 network cable, and Category 7/Category 7 network cable?
Israel (PRUnderground) September 11th, 2023
If you are in the network communication industry, I believe you should know some Ethernet cables, such as Category 5e network cables, Category 6 network cables, and Category 7 network cables, etc. But do you know what the Cat8 network cable is? What is the difference between it and Category 5 network cable, Category 6/Category 6 network cable, and Category 7/Category 7 network cable?
What is CAT8 network cable?
Cat8 network cable is the latest generation double shielded (SFTP) network jumper, It has two wire pairs, can support 2000MHz bandwidth, and the transmission rate is as high as 40Gb/s, but its maximum transmission distance is only 30m, so it generally used For the connection of servers, switches, distribution frames, and other equipment in short-distance data centers.
Cat8 standard for eight types of network cables
The relevant standards of Cat8 eight types of network cables were officially released by the TR-43 Committee of the American Telecommunications Industry Association (TIA) in 2016, as follows:
1. It complies with the IEEE 802.3bq 25G / 40GBASE-T standard, which stipulates the minimum transmission rate of Cat8 network cables, and can support 25 Gbps and 40 Gbps network cabling.
2. Conforms to the ANSI/TIA-568-C.2-1 standard, which specifies the channel and permanent link of Cat8 network cable, and includes the restrictions of resistance unbalance, TCL, and ELTCTL.
3. It complies with the ANSI/TIA-1152-A standard, which stipulates the measurement and accuracy requirements of a Cat8 network cable field tester. 4. Conforms to the ISO/IEC-11801 standard, which specifies the channels and permanent links of Category I/II Cat8 network cables.
Category of Cat8 network cable
In the ISO/IEC-11801 standard, Cat8 network cables are divided into Category I and Category II according to the channel level. Among them, the shielding types of Category I Cat8 network cables are U/FTP and F/UTP, which are backward compatible with Cat5e and Cat6, Cat6a RJ45 connector interface; Category II Cat8 network cable shielding type is F/FTP or S/FTP, which is backward compatible with TERA or GG45 connector interface.
The difference between Cat8 network cable and Category 5e network cable, Category 6 network cable, Category 6 network cable, and Category 7/Category 7 network cable
At present, there are five types of network cables that are common on the market: Category 5e network cables, Category 6 network cables, Category 6e network cables, Category 7 network cables, and Category 7e network cables. So what is the difference between Cat8 network cables and these network cables??
As can be seen from the above table, Cat8 network cables, like Category 7/super seven network cables, are shielded twisted pairs, which can be used in data centers, high-speed and bandwidth-intensive places, although the transmission distance of Cat8 network cables is not as good as Category 7/Category 7e network cable is far away, but its speed and frequency are much higher than Category 7/Category 7e network cable. There is a big difference between Cat8 category 8 network cable and category 5e network cable, category 6/category 6 network cable, which is mainly reflected in the speed, frequency, transmission distance, and application.
Our Cat8 network cable product list is as below:
90 Degree Slim Cat8 Ethernet Cable
Both Ends Left or Right Angled Slim Cat8 Ethernet Cable
Both Ends Down or Up Angled Slim Cat8 Ethernet Cable
Slim Cat8 Ethernet Extension Cable
Slim Cat8 Ethernet Extension Cable With Screws Panel Mount
About Shenzhen STC Electronic Co., Ltd
STC-CABLE is an industry-leading manufacturer of high-performance cabling and connectivity solutions. Founded in 2008, STC provides end-to-end connectivity solutions serving a variety of markets–including corporate, digital signage, education, healthcare, home theater, and hospitality.
As a professional cable assembly factory, STC brings a complete portfolio of products and solutions including USB 2.0 Cables, USB 3.0 Cables, USB C Cables, Drive Cables, Network Cables & Adapters, Audio & Video Cables, Serial & Parallel Cables, Audio-Video Products, Computer power Cables internal and so on.
Leo Zhang
Sales Manager
leo@stccable.com
Tel: (86) 0755 2321 4701
(86) 134 2285 3610
www.stc-cable.com
STC Electronic (Hong Kong) Co., Limited
Shenzhen STC Electronic Co., LTD
