For the traditional TYPE-C hard disk box test, two cables need to be prepared. The first cable has only a USB3.0 data cable without USB2.0, and the second cable has only a USB2.0 data cable without USB3.0. When testing the TYPE-C USB3.0 rate channel, first insert the USB3.0 data cable to test the USB3.0 channel on side 1 of the TYPE-C, Then pull out the cable and rotate 180 degrees before inserting it into the USB3.0 channel on the other side of the test TYPE-C USB2.0, When testing the TYPE-C USB2.0 rate channel, use the device with only USB2.0 data cable to plug into the TYPE-C interface to test the USB2.0 rate, Only through the above steps can the channel test of TYPE-C interface be completed. The traditional test method is complicated, time-consuming, easy to detect, and miss test.
The STC-EC0002 TYPE-C test equipment developed and designed by STC can solve your problems. It is simple to operate, convenient to use, stable and accurate, and only takes 1/3 of the time of traditional testing, greatly improving production efficiency in this era of high labor costs, the most precious thing is time.
Procedure of use
1> When the test device U3A lights up, the computer can identify the device through the USB3-1 channel in the TYPE-C A direction and perform a read/write testing.
2> Next, flip the gear switch to the U3B gear, press the reset switch for 1 second, release it, and the corresponding U3B light is steady on. At this time, the computer passes the TYPE-C USB 3.1 channel in the direction of B recognizes the device, and carries out read-write testing.
3> Then switch the gear switch to U2 gear, press the reset switch for 1 second, and release it, and the corresponding U2 light is steady on. At this time, the computer recognizes the device through the USB 2.0 channel of TYPE-C for read-and-write testing.
Feature:
1. The product is a TYPE‑C device tester, the test is more convenient and faster.
2. Connect the computer with the equipped USB 3.0 A male to A male cable.
3. STC-EC0002 TYPE-C test equipment solves your troubles, possesses simple operation, is convenient to use, stable and accurate.
4. Only takes 1/3 of the time of traditional testing, which greatly saves time.
5. Tester modules have stable structure, excellent performance, and long service life.
Usage Steps:
Insert the TYPE-C female port storage device that needs to be tested, and the test device U3A light is on. At this time, the computer recognizes the device through the 3.1 channel of TYPE-C AR, and performs the read and write test; Next, switch the gear toggle to the U3B position, press the reset switch for 1 second, and then release, the corresponding U3B light is always on. At this time, the computer recognizes the device through the 3.1 channel of TYPE-C B direction, and reads and writes the test; Move the gear switch to gear 02, press the reset switch for 1 second, and then release it, the corresponding U2 light is always on. At this time, the computer recognizes the device through the 2.0 channel of TYPE-C and reads and writes. The 3 A direction, B direction, and the three-channel tests of 2.0 of this TYPE-C female port device are completed
Three channel tests of USB3A, B, and USB2.0 to this TYPE-C Female port device are completed.
TYPE C U2U3 Channel Separation Tester
USB3.0 Type A to Left Right USB 3.1 Type C With Single Screw Panel Mount Locking Cable
USB3.0 Type A to USB 3.1 Type C With Single Screw Panel Mount Locking Cable
USB3.0 Type A to 90 degrees Up or Down USB 3.1 Type C With Dual Screw Panel Mount Locking Cable
USB3.0 Type A to USB 3.1 Type C With Dual Screw Panel Mount Locking Cable
USB 3.0 Type A Male to Type C Female Data Cable with Panel Mount Screw Hole
USB 3.0 Type A to 90 degrees Up and Down angle USB 3.1 Type C Charging Data Cable
About Shenzhen STC Electronic Co., Ltd
STC-CABLE is an industry-leading manufacturer of high-performance cabling and connectivity solutions. Founded in 2008, STC provides end-to-end connectivity solutions serving a variety of markets–including corporate, digital signage, education, healthcare, home theater, and hospitality.
As a professional cable assembly factory, STC brings a complete portfolio of products and solutions including USB 2.0 Cables, USB 3.0 Cables, USB C Cables, Drive Cables, Network Cables & Adapters, Audio & Video Cables, Serial & Parallel Cables, Audio-Video Products, Computer power Cables internal and so on.
Leo Zhang
Sales Manager
leo@stccable.com
Tel: (86) 0755 2321 4701
(86) 134 2285 3610
www.stc-cable.com
STC Electronic (Hong Kong) Co., Limited
Shenzhen STC Electronic Co., LTD
