How do I connect my mini-SAS? (Source: www.stc-cable.com)

How do I connect my mini-SAS?

Connecting Mini-SAS (Mini Serial Attached SCSI) cables involves a few straightforward steps. The exact process depends on whether you’re connecting internal or external devices. Here’s a step-by-step guide for both scenarios:

1. Connecting Internal Devices

Components Needed:

1> Mini-SAS Cables: Typically with SFF-8087 connectors.

2> RAID Controller or Motherboard with Mini-SAS Ports: Often used to connect to multiple drives.

3> SAS or SATA Drives: The devices you want to connect.

Steps:

1> Power Down the System: Ensure that the server or workstation is turned off and unplugged from any power source.

2>Locate Mini-SAS Ports:

RAID Controller/Motherboard: Identify the Mini-SAS ports on your RAID controller or motherboard. These are usually located at the rear of the motherboard or on the RAID controller card.

3> Connect Mini-SAS Cable to RAID Controller/Motherboard:

Insert one end of the Mini-SAS cable (SFF-8087) into the Mini-SAS port on the RAID controller or motherboard. The connectors are keyed to ensure correct orientation, so they should fit snugly.

4> Connect the Other End to the Storage Drives:

Internal Drives: Connect the other end of the Mini-SAS cable to the internal SAS or SATA drives. This might require an adapter if your drives have different connectors.

Drive Backplane: In some systems, you might connect to a drive backplane, which consolidates multiple drive connections.

6> Secure Connections: Ensure that all connections are secure and properly seated.

7> Power On the System: Plug the system back in and power it on. Check if the connected drives are recognized by the system or RAID controller.

2. Connecting External Devices

Components Needed:

1> Mini-SAS Cables: Typically with SFF-8088 or Mini-SAS HD connectors.

2> External Storage Enclosure: With Mini-SAS ports.

3> Host Adapter/RAID Controller: On the server or workstation.

Steps:

1> Power Down the System: Turn off the computer or server and unplug it from the power source.

2> Locate Mini-SAS Ports:

External Storage Enclosure: Identify the Mini-SAS ports on the storage enclosure.

Host Adapter/RAID Controller: Locate the corresponding Mini-SAS ports on the host system.

3> Connect the Mini-SAS Cable to the Host Adapter/RAID Controller:

Insert one end of the Mini-SAS cable (SFF-8088 for external connections) into the Mini-SAS port on the host adapter or RAID controller.

4> Connect the Other End to the External Storage Enclosure:

Insert the other end of the Mini-SAS cable into the Mini-SAS port on the external storage enclosure.

5> Secure Connections: Make sure that both ends of the cable are securely connected and properly seated.

6> Power On the System: Plug the system back in and power it on. Also, power on the external storage enclosure. Verify that the system recognizes the external storage device.

Tips for Successful Connections

1> Check Compatibility: Ensure that the Mini-SAS cables, connectors, and devices are compatible with each other (e.g., SFF-8087 vs. SFF-8088 or Mini-SAS HD).

2> Handle with Care: Mini-SAS connectors and cables are sensitive to physical damage, so handle them carefully to avoid damaging the connectors.

3> Consult Documentation: Refer to the user manuals for specific instructions on connecting devices, as different manufacturers may have specific requirements or recommendations.

By following these steps, you can effectively connect Mini-SAS cables to internal or external devices, ensuring a high-speed and reliable data connection in your computing environment.

Slim SAS 8i 76P SFF-8654 to SFF-8654 Cable

MINI SAS 38p SFF-8654 TO 4 SATA with 90-degree latching

MINI SAS 38p SFF-8654 TO 4 SATA Cable

External Mini SAS HD SFF-8644 to QSFP(SFF-8436) Hybrid SAS Cable

Mini SAS HD 8644 to 4 SFF-8482 With SATA Power

Mini SAS HD 8644 to 4 SFF-8482 With Molex Power

External HD Mini SAS SFF 8644 to Mini SAS SFF 8644 Cable

external Mini SAS HD SFF-8644 to 90 Degree Right Angle 4 Ports SATA Cable

External Mini SAS HD SFF-8644 to 90 Degree Left Angle 4 Ports SATA Cable

About Shenzhen STC Electronic Co., Ltd

STC-CABLE is an industry-leading manufacturer of high-performance cabling and connectivity solutions. Founded in 2008, STC provides end-to-end connectivity solutions serving a variety of markets–including corporate, digital signage, education, healthcare, home theater, and hospitality.

As a professional cable assembly factory, STC brings a complete portfolio of products and solutions including USB 2.0 Cables, USB 3.0 Cables, USB C Cables, Drive Cables, Network Cables & Adapters, Audio & Video Cables, Serial & Parallel Cables, Audio-Video Products, Computer power Cables internal and so on.

Leo Zhang
Sales Manager
leo@stccable.com
Tel: (86) 0755 2321 4701
(86) 134 2285 3610
www.stc-cable.com
STC Electronic (Hong Kong) Co., Limited
Shenzhen STC Electronic Co., LTD